Excellent Corrosion-resistant Polyester Filament Geotextiles-manufacture,factory,supplier from China

The characteristics of filament geotextiles are as follows:High strength and high draft: The strength and draft capacity of filament geotextiles are higher than those of ordinary geotechnical materials, and can withstand high loads and stresses in different engineering environments.Acid and alkali resistance, aging resistance: Filament geotextiles have good acid and alkali resistance, are not affected by the environment, and have high durability.Good penetration and good drainage performance: the mesh of filament geotextile can selectively hinder the movement of soil particles, but it does not

Quality filament geotextiles grasp the following three points:1, look at the defects. Knitted polyester fabric appearance defects more, serious defects will affect the effect of wearing. Such as leaky needle hole, lack of silk, hook silk, broken head, silk pulling tight and serious weft slanting, etc.. Lighter defects, such as color difference, rolled edge, bad edge, spell silk, knotted knot, color flower, reflection, oil-colored silk, thick and thin silk, etc. Although the cloth with light defects can be worn, but affect the grade of the fabric.2、Look at the appearance.

 Filament polyester nonwoven geotextile plays a role in railroad engineering  Filament polyester non-woven geotextile is a kind of geosynthetic material made of polyester filament fibers with high strength, corrosion resistance, aging resistance and good water permeability.  Filament polyester nonwoven geotextiles are needed for railroad construction mainly because they have a series of excellent properties, which can help enhance the stability and bearing capacity of the soil, and improve the durability and safety of the railroad roadbed.

1、InsulationThat is, the application of filament geotextile to have different chemical properties (particle size, dispersion, mortar consistency and relative density, etc.) of the construction of raw materials (such as sand and sand grains, sand and gravel, sand and soil mix, etc.) to carry out isolation.

                                                                                                 Characteristics of Geocell1. Lightweight material, wear-resistant, chemically stable, resistant to light oxygen aging, acid and alkali, suitable for different soil and desert geological conditions.2.

One, needle punching non-woven geotextile, specifications 100g/m2-600g/m2 between any choice, the main raw material is made of polyester staple fiber or polypropylene staple fiber, through the needle punching method, the main use is: rivers, seas, lakes and river dikes slope protection, surrounded by the sea to create fields, docks, locks flood control and rescue and other projects, is an effective way to play through the back filtration of soil and water conservation and prevention of pipe surge.Second, needle-punching nonwoven and PE film composite geotextile, specifications have a cloth a f

Nonwoven geotextile is a kind of geomaterial made of high-strength, corrosion-resistant synthetic fibers through thermal bonding or needle-punching process, and its role and application scope are as follows:1. Filtration: nonwoven geotextile has good filtration performance, which can block the soil particles, so that water can penetrate freely, thus preventing soil particles from being washed away.2. Protective effect: nonwoven geotextile can effectively increase the tensile strength of the soil, prevent soil loss and loosening, and protect the surface structure from erosion and damage.3.

                                                     Materials and uses of geotechnical sandbagsThe materials of geotechnical sandbags usually include the following:High-strength polypropylene (PP) fiber: high-strength polypropylene fiber is the main material for making geosandbags, which has high strength, weather resistance and chemical corrosion resistance.

Geosynthetics are geosynthetic materials that are widely used in geotechnical engineering today, and they are a generic term for polymer products. As early as the 1920s, the chemical industry successfully produced synthetic materials, but it was not until the late 1950s that these materials were gradually promoted as a new type of construction material for geotechnical engineering. The early products were mainly permeable woven and non-woven geotextiles, and later impermeable geomembranes were produced.

HDPE composite HDPE film is also known as high-density polyethylene film, HDPE geomembrane, HDPE anti-seepage film, HDPE film is a plastic coil composed of HDPE, and HDPE is a high crystallinity, non-polar thermoplastic resin. The appearance of the original HDPE is milky white, and the thin section is translucent to a certain extent. PE has excellent resistance to most domestic and industrial chemicals.1. HDPE geomembrane is a flexible waterproof material with a high anti-seepage coefficient (1×10-17 cm/s);2.