Isolation Performance Geotextiles-manufacture,factory,supplier from China

                                                                Performance characteristics of geotechnical cells1. It has flexible expansion and contraction, can be transported and stacked, and can be tensioned into a mesh during construction. It is filled with loose materials such as soil, gravel, and concrete, forming a structure with strong lateral limitations and high stiffness.2.

The characteristics of filament geotextiles are as follows:High strength and high draft: The strength and draft capacity of filament geotextiles are higher than those of ordinary geotechnical materials, and can withstand high loads and stresses in different engineering environments.Acid and alkali resistance, aging resistance: Filament geotextiles have good acid and alkali resistance, are not affected by the environment, and have high durability.Good penetration and good drainage performance: the mesh of filament geotextile can selectively hinder the movement of soil particles, but it does not

1、InsulationThat is, the application of filament geotextile to have different chemical properties (particle size, dispersion, mortar consistency and relative density, etc.) of the construction of raw materials (such as sand and sand grains, sand and gravel, sand and soil mix, etc.) to carry out isolation.

Quality filament geotextiles grasp the following three points:1, look at the defects. Knitted polyester fabric appearance defects more, serious defects will affect the effect of wearing. Such as leaky needle hole, lack of silk, hook silk, broken head, silk pulling tight and serious weft slanting, etc.. Lighter defects, such as color difference, rolled edge, bad edge, spell silk, knotted knot, color flower, reflection, oil-colored silk, thick and thin silk, etc. Although the cloth with light defects can be worn, but affect the grade of the fabric.2、Look at the appearance.

HDPE composite HDPE film is also known as high-density polyethylene film, HDPE geomembrane, HDPE anti-seepage film, HDPE film is a plastic coil composed of HDPE, and HDPE is a high crystallinity, non-polar thermoplastic resin. The appearance of the original HDPE is milky white, and the thin section is translucent to a certain extent. PE has excellent resistance to most domestic and industrial chemicals.1. HDPE geomembrane is a flexible waterproof material with a high anti-seepage coefficient (1×10-17 cm/s);2.

                                                                           Do you know the function of HDPE geomembraneOf course, HDPE geomembrane is a geosynthetic material made of high-density polyethylene material, mainly used for anti-seepage isolation, anti-seepage leakage, popularization of highway construction, water conservancy engineering, and environmental protection in civil engineering.

Geosynthetics are geosynthetic materials that are widely used in geotechnical engineering today, and they are a generic term for polymer products. As early as the 1920s, the chemical industry successfully produced synthetic materials, but it was not until the late 1950s that these materials were gradually promoted as a new type of construction material for geotechnical engineering. The early products were mainly permeable woven and non-woven geotextiles, and later impermeable geomembranes were produced.

One, needle punching non-woven geotextile, specifications 100g/m2-600g/m2 between any choice, the main raw material is made of polyester staple fiber or polypropylene staple fiber, through the needle punching method, the main use is: rivers, seas, lakes and river dikes slope protection, surrounded by the sea to create fields, docks, locks flood control and rescue and other projects, is an effective way to play through the back filtration of soil and water conservation and prevention of pipe surge.Second, needle-punching nonwoven and PE film composite geotextile, specifications have a cloth a f

Currently, as our company's export quota increases year by year, business managers increase capital investment. Constantly update production equipment to ensure the production quality of goods and strive to maintain cutting-edge production technology.Now our company's annual production capacity of non-woven geotextiles can reach 10,000 tons, and our company is quietly becoming one of the top global geotextile manufacturers in the world.

Good news - Our company has made a new breakthrough in the field of non-woven geotextilesRecently, our company has made a major breakthrough in the field of geosynthetics, injecting new momentum into the development of the industry.