Pond and fish pond anti seepage black HDPE Geomembrane

Product specifications;

Materials; Mainly divided into: low-density polyethylene (LDPE) geomembrane, high-density polyethylene (HDPE) geomembrane, and EVA geomembrane.

Thickness; 1.0-2.0mm

Wide width; 4-8 meters

If there are special requirements, such as packaging requirements (width, length, thickness), please inform customer service personnel

Contact Now E-Mail Telephone WhatsApp

Product Details

Pond and fish pond anti seepage black HDPE Geomembrane

With complete specifications of width and thickness, it has excellent resistance to environmental stress cracking and chemical corrosion, as well as excellent resistance to chemical corrosion. It has a large temperature range and a long service life, and is used in landfill sites, tailings storage sites, canal seepage prevention, dam seepage prevention, and subway engineering

Pond and fish pond anti seepage black HDPE Geomembrane

Product characteristics;

According to national standards, polyethylene film with a thickness of 0.2m and a stabilizer used in hydraulic engineering can work for up to 40-50 years under clean water conditions and 30-40 years under sewage conditions, depending on whether the plastic film has lost its anti-seepage and water blocking effect. Therefore, the service life of the geomembrane is sufficient to meet the anti-seepage requirements of the dam.

Pond and fish pond anti seepage black HDPE Geomembrane

Application scope;

Environmental protection and hygiene engineering, water conservancy and geotechnical engineering, municipal engineering, landscaping, stone mining, aquaculture industry (fish pond, shrimp pond lining, etc.)

HDPE Geomembrane Technical Parameter (GRI GM13 ASTM Standard)
Spec Properties	Test method ASTM	GMS0.5	GMS0.75	GMS1.0	GMS1.25	GMS1.5	GMS2.0	GMS2.5
Thickness	D5199	0.5mm	0.75mm	1.00mm	1 .25mm	1.50mm	2.00mm	2.50mm
Density (≥ g/cc)	D1505	0.940	0.940	0.940	0.940	0.940	0.940	0.940
Tensile Properties (Each direction)(≥) • yield strength • break strength • yield elongation • break elongation	D6693 Type IV	8 kN/m 14 kN/m 12% 700%	11 kN/m 20 kN/m 12% 700%	15 kN/m 27 kN/m 12% 700%	18 kN/m 33 kN/m 12% 700%	22 kN/m 40 kN/m 12% 700%	29kN/m 53 KN/m 12% 700%	37kN/m 67kN/m 12% 700%
Tear Resistance (≥)	D 1004	64N	93N	125 N	156N	187N	249 N	311 N
Puncture Resistance(≥)	D 4833	160N	240N	320 N	400 N	480N	640 N	800 N
Stress Crack Resistance (≥)	D 5397	300 hr	300 hr	300 hr	300 hr	300 hr	300 hr	300 hr
Carbon Black Content	D 1603	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%
Carbon Black Dispersion	D 5596	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)
Oxidative Induction Time(OIT)(≥) (a)Standard OIT ——or—— (b)High Pressure OIT	D 3895 D 5885	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min

Packing of High Quality HDPE Geomembrane Pond Liner

Pond and fish pond anti seepage black HDPE Geomembrane

Pond liner geotextile membrane for water seepage prevention HDPE Geomembrane

Pond and fish pond anti seepage black HDPE Geomembrane

Usage Scenarios of High Quality HDPE Geomembrane Pond Liner

Pond and fish pond anti seepage black HDPE Geomembrane

HDPE Geomembrane Technical Parameter (GRI GM13 ASTM Standard)
Spec Properties	Test method ASTM	GMS0.5	GMS0.75	GMS1.0	GMS1.25	GMS1.5	GMS2.0	GMS2.5
Thickness	D5199	0.5mm	0.75mm	1.00mm	1 .25mm	1.50mm	2.00mm	2.50mm
Density (≥ g/cc)	D1505	0.940	0.940	0.940	0.940	0.940	0.940	0.940
Tensile Properties (Each direction)(≥) • yield strength • break strength • yield elongation • break elongation	D6693 Type IV	8 kN/m 14 kN/m 12% 700%	11 kN/m 20 kN/m 12% 700%	15 kN/m 27 kN/m 12% 700%	18 kN/m 33 kN/m 12% 700%	22 kN/m 40 kN/m 12% 700%	29kN/m 53 KN/m 12% 700%	37kN/m 67kN/m 12% 700%
Tear Resistance (≥)	D 1004	64N	93N	125 N	156N	187N	249 N	311 N
Puncture Resistance(≥)	D 4833	160N	240N	320 N	400 N	480N	640 N	800 N
Stress Crack Resistance (≥)	D 5397	300 hr	300 hr	300 hr	300 hr	300 hr	300 hr	300 hr
Carbon Black Content	D 1603	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%	2.0-3.0%
Carbon Black Dispersion	D 5596	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)	Note(1)
Oxidative Induction Time(OIT)(≥) (a)Standard OIT ——or—— (b)High Pressure OIT	D 3895 D 5885	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min	100 min 400 min