100g-800g Composite Geotextile
100g-800g Composite Geotextile - 100g-800g Composite Geotextile is used as the substrate, and polyethylene, polyvinyl chloride and special elements are used asthe membrane. The composite geotextile of the non-woven fabric, has one material with one membrane,two fabric with one membrane, two menbrane with one fabric ect.
Material: PET
Color: White
Film thickness: 0.1-1.0mm
Specification: 100g-800g
Length: 50-100m
Certificate: CE/ISO9001
Scope of application:
PET Composite Geotextile is an best invulnerable material, appropriate for channel, drainage, guard, undeniable reservoir secure reinforcement and rockfill dam and different water conservancy and visitors tunnel purposes
Resistance to chemicals, corrosion and mildew
Water and earth are very different in nature. Some are alkaline, some are acidic, some contain much salt, and some contain various elements, so they must be chemically stable.
Good water permeability
Composite geotextile filtration and drainage need to be permeable, so it must have good water permeability.
Product implementation standards:
Composite Geotextile Technical Specification | ||||||||||
Item | Index | |||||||||
1 | Nominal breaking strength / ( kN / m ) | 5 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
2 | Longitudinal and transverse rupture strength /( kN / m )≥ | 5.0 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
3 | Vertical and horizontal standard strength corresponding to elongation /% | 30-100 | ||||||||
4 | CBR bursting strength /kN ≥ | 1.1 | 1.5 | 1.9 | 2.2 | 2.5 | 2.8 | 3.0 | 3.2 | |
5 | Vertical and horizontal tear strength / kN ≥ | 0.15 | 0.25 | 0.32 | 0.40 | 0.48 | 0.56 | 0.62 | 0.70 | |
8 | Vertical Permeability Index / ( cm / s) | According customer needs | ||||||||
9 | Width deviation /% | -1.0 | ||||||||
Item | Membrane thickness/mm | |||||||||
0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 1.0 | |||
Hydrostatic pressure resistance / MPa | 1 fabric with 1 membrane | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | |
2 fabric with 1 membrane | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | 1.8 |
Packing of PET Composite Geotextile
You can freely choose PE film or PP woven bag for outer packaging, and there are paper tubes of different sizes inside the product for you to choose freely.
Geotextiles grasp the following three points:
Look at the defects. Knitted polyester fabrics have many appearance defects, and serious defects will affect the wearing effect. Such as leak needle holes, missing wires, hooked wires, broken ends, wire tension and serious weft skew, etc. Lighter defects, such as chromatic aberration, curling, bad edges, splicing, knots, colored flowers, reflections, oil-colored silk, thick and thin silk, etc. Although the cloth with slight defects can be worn, it will affect the grade of the fabric.
Composite Geomembrane Technical Specification | ||||||||||
Item | Index | |||||||||
1 | Nominal breaking strength / ( kN / m ) | 5 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
2 | Longitudinal and transverse rupture strength /( kN / m )≥ | 5.0 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
3 | Vertical and horizontal standard strength corresponding to elongation /% | 30-100 | ||||||||
4 | CBR bursting strength /kN ≥ | 1.1 | 1.5 | 1.9 | 2.2 | 2.5 | 2.8 | 3.0 | 3.2 | |
5 | Vertical and horizontal tear strength / kN ≥ | 0.15 | 0.25 | 0.32 | 0.40 | 0.48 | 0.56 | 0.62 | 0.70 | |
8 | Vertical Permeability Index / ( cm / s) | According customer needs | ||||||||
9 | Width deviation /% | -1.0 | ||||||||
Item | Membrane thickness/mm | |||||||||
0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 1.0 | |||
Hydrostatic pressure resistance / MPa | 1 fabric with 1 membrane | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | |
2 fabric with 1 membrane | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | 1.8 |
Composite Geomembrane Technical Specification | ||||||||||
Item | Index | |||||||||
1 | Nominal breaking strength / ( kN / m ) | 5 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
2 | Longitudinal and transverse rupture strength /( kN / m )≥ | 5.0 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
3 | Vertical and horizontal standard strength corresponding to elongation /% | 30-100 | ||||||||
4 | CBR bursting strength /kN ≥ | 1.1 | 1.5 | 1.9 | 2.2 | 2.5 | 2.8 | 3.0 | 3.2 | |
5 | Vertical and horizontal tear strength / kN ≥ | 0.15 | 0.25 | 0.32 | 0.40 | 0.48 | 0.56 | 0.62 | 0.70 | |
8 | Vertical Permeability Index / ( cm / s) | According customer needs | ||||||||
9 | Width deviation /% | -1.0 | ||||||||
Item | Membrane thickness/mm | |||||||||
0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 1.0 | |||
Hydrostatic pressure resistance / MPa | 1 fabric with 1 membrane | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | |
2 fabric with 1 membrane | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | 1.8 |
Related Products
Submitted successfully
We will contact you as soon as possible