Water conservancy dam projectComposite Geotextile
Water conservancy dam projectComposite Geotextile -PET geotextile is used as the substrate, and polyethylene, polyvinyl chloride and outstanding factors are used asthe membrane. The composite geotextile of the non-woven fabric, has one fabric with one membrane,two material with one membrane, two menbrane with one material ect,Tensile, tear resistance, pinnacle breaking and one of a kind bodily and mechanical common overall performance signs are high, the product has immoderate strength, top notch extension performance, massive deformation modulus, acid and alkali resistance, corrosion resistance, getting older resistance, right anti-seepage universal overall performance and so on
Material: PET
Color: White
Film thickness: 0.1-1.0mm
Specification: 100g-800g
Length: 50-100m
Certificate: CE/ISO9001
Scope of application:
Water conservancy dam projectComposite Geotextile ,The decision of polymer substances and the manufacturing procedure introduced anti-aging agent, so it can be used in unconventional temperature environment. It is frequently used for anti-seepage remedy of dykes, drainage ditches, and anti-fouling cure of waste yards. Function: seepage prevention, isolation use: earth dam, rockfill dam, masonry dam and unfold strain concrete dam; Horizontal anti-seepage overlaying in the front of embankment and dam, vertical anti-seepage layer of foundation; Tailings dam, sewage storage dam physique and reservoir area; Construction cofferdam; The significant software of the composite geomembranes of channels and liquid storage ponds additionally performs a defensive function in the ecological environment.
Good bodily and mechanical properties
Water conservancy dam projectComposite Geotextile, Impervious isolation Composite GeotextileGeotextile as the defensive layer of geomembrane, so that the protecting tightly closed layer is no longer damaged. In order to limit UV publicity and make bigger anti-aging performance, it is fantastic to use embedding method.Construction suggestion
Water conservancy dam projectComposite Geotextile, First of all, use small diameter sand or clay to stage the base surface, and then lay geomembrane. Geomembrane do now not be too tight, buried in the soil at each ends of the phase is corrugated, and subsequently in the unfold of geomembrane with high-quality sand or clay unfold a layer of about 10cm over the layer. Build 20-30cm block stone (or concrete precast block) for anti-impact safety layer
Product implementation standards:
Composite Geotextile Technical Specification | ||||||||||
Item | Index | |||||||||
1 | Nominal breaking strength / ( kN / m ) | 5 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
2 | Longitudinal and transverse rupture strength /( kN / m )≥ | 5.0 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
3 | Vertical and horizontal standard strength corresponding to elongation /% | 30-100 | ||||||||
4 | CBR bursting strength /kN ≥ | 1.1 | 1.5 | 1.9 | 2.2 | 2.5 | 2.8 | 3.0 | 3.2 | |
5 | Vertical and horizontal tear strength / kN ≥ | 0.15 | 0.25 | 0.32 | 0.40 | 0.48 | 0.56 | 0.62 | 0.70 | |
8 | Vertical Permeability Index / ( cm / s) | According customer needs | ||||||||
9 | Width deviation /% | -1.0 | ||||||||
Item | Membrane thickness/mm | |||||||||
0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 1.0 | |||
Hydrostatic pressure resistance / MPa | 1 fabric with 1 membrane | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | |
2 fabric with 1 membrane | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | 1.8 |
Packing of PET Composite Geotextile
You can freely choose PE film or PP woven bag for outer packaging, and there are paper tubes of different sizes inside the product for you to choose freely.
Geotextiles grasp the following three points:
Fabric appearance is closely related to fabric organization. Therefore, when choosing knitwear, it is also necessary to carefully observe the luster, color, and pattern of the fabric. When pulling the fabric with both hands, look at its longitudinal or horizontal elasticity and extensibility, and whether it is easy to deform; Weave, the space between the coils, whether it is loose or tight, whether the handle is soft or rough, etc. In short, it is necessary to observe whether the fabric meets the basic requirements of the garment style, so as to achieve the effect of consistent coordination between the appearance of the fabric and the style of the garment.
Composite Geomembrane Technical Specification | ||||||||||
Item | Index | |||||||||
1 | Nominal breaking strength / ( kN / m ) | 5 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
2 | Longitudinal and transverse rupture strength /( kN / m )≥ | 5.0 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
3 | Vertical and horizontal standard strength corresponding to elongation /% | 30-100 | ||||||||
4 | CBR bursting strength /kN ≥ | 1.1 | 1.5 | 1.9 | 2.2 | 2.5 | 2.8 | 3.0 | 3.2 | |
5 | Vertical and horizontal tear strength / kN ≥ | 0.15 | 0.25 | 0.32 | 0.40 | 0.48 | 0.56 | 0.62 | 0.70 | |
8 | Vertical Permeability Index / ( cm / s) | According customer needs | ||||||||
9 | Width deviation /% | -1.0 | ||||||||
Item | Membrane thickness/mm | |||||||||
0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 1.0 | |||
Hydrostatic pressure resistance / MPa | 1 fabric with 1 membrane | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | |
2 fabric with 1 membrane | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | 1.8 |
Composite Geomembrane Technical Specification | ||||||||||
Item | Index | |||||||||
1 | Nominal breaking strength / ( kN / m ) | 5 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
2 | Longitudinal and transverse rupture strength /( kN / m )≥ | 5.0 | 7.5 | 10 | 12 | 14 | 16 | 18 | 20 | |
3 | Vertical and horizontal standard strength corresponding to elongation /% | 30-100 | ||||||||
4 | CBR bursting strength /kN ≥ | 1.1 | 1.5 | 1.9 | 2.2 | 2.5 | 2.8 | 3.0 | 3.2 | |
5 | Vertical and horizontal tear strength / kN ≥ | 0.15 | 0.25 | 0.32 | 0.40 | 0.48 | 0.56 | 0.62 | 0.70 | |
8 | Vertical Permeability Index / ( cm / s) | According customer needs | ||||||||
9 | Width deviation /% | -1.0 | ||||||||
Item | Membrane thickness/mm | |||||||||
0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 1.0 | |||
Hydrostatic pressure resistance / MPa | 1 fabric with 1 membrane | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | |
2 fabric with 1 membrane | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.4 | 1.6 | 1.8 |
Related Products
Submitted successfully
We will contact you as soon as possible