Polyethylene reinforcement Composite Geotextile

Polyethylene reinforcement Composite Geotextile

Scope of application:

• PET Composite Geotextile is an best tightly closed material, extremely good for channel, drainage, guard, undeniable reservoir tightly closed reinforcement and rockfill dam and incredible water conservancy and website traffic tunnel purposes
  One layer fabric with one layer membrane: fabric uint weight100~800gsm, membrane thickness: 0.l~l.0m
  Two laver cloth with one laver membrane: fabric uint weiht 100~400gsm.membrane thickness: 0.2~1.0mm
  One layer fabric with two layer membrane: fabric uint weight 100~800gsm , membrane thickness: 0.1~0.8mm
  

• Product advantage
  

  Polyethylene reinforcement Composite Geotextile,Highway railway airport Composite Geotextile High strength, due to the use of plastic flat wire, in moist and dry prerequisites can preserve full electricity and elongation.

  Corrosion resistance, in one of a kind pH degrees of soil and water can be lengthy corrosion resistance.
  Water permeability is excellent between the flat wire gap, so it has excellent water seepage performance.
  Good antimicrobial resistance to microorganisms, moth-eaten are now not damaged.
  Construction is convenient, due to the fact the cloth is mild and soft, it is handy to transport, lay and construction.

•  Good water permeability

  Polyethylene reinforcement Composite Geotextile,It is made of polymer materials with anti-aging agent added in the production process. It performs well in unconventional temperature environment. Dikes, drainage ditches, waste yards and so on are good places for it to display its skills. 2, the second is that this product has good water filtration, not only can be used for waterproof, but also has good drainage effect. Because of the strong extensibility of the raw materials used in its production. 3, waterproof geotextile can be very strong adaptability to foundation deformation, and in the specific construction work, the operation is also very simple and convenient.
  

Product implementation standards:

Packing of PET Composite Geotextile
You can freely pick PE movie or PP woven bag for outer packaging, and there are paper tubes of exceptional sizes inner the product for you to pick freely.
2. How can we warranty the quality?
Always a pre-production pattern before mass production;
Always lift out closing inspection earlier than shipment;.

 

Geomembrane use
1. Before laying the geomembrane, the corresponding acceptance certificates of the civil engineering prefer to be obtained.
2. Before reducing the geomembrane, you have to precisely measure its applicable size, and then restrict it in accordance to the authentic size. Generally, it is now no longer wonderful to decrease in accordance to the dimension proven in the figure. It have to be numbered one by using one and recorded in issue on the super form.
3. When laying the geomembrane, the welding seam choose to be minimized, and the uncooked factors ought to be saved as a lot as potential under the premise of making sure the quality. At the identical time, it is available to make positive the quality.
4. The overlapping width of the joint between the membrane and the membrane is typically now no longer a total lot tons much less than 10cm, and the route of the welding seam is normally outfitted parallel to the most slope, that is, geared up alongside the slope direction.
5. Usually in corners and deformed areas, the dimension of the joint ought to be shortened as a complete lot as possible. Except for specific requirements, on slopes with a slope accelerated than 1:6, internal 1.5 meters from the pinnacle slope or the stress interest area, strive now now no longer to set up welds.
6. During the laying of the geomembrane, synthetic wrinkles have to be avoided. When the temperature is low, it ought to be stretched as a strategies as conceivable and paved flat.
7. After the laying of the geomembrane is completed, taking walks and transferring tools on the ground of the geomembrane want to be minimized. Anything that can reason damage to the anti-seepage membrane have to no longer be positioned or carried on the membrane to hold away from injury to the membrane. motive unintended injury.